Şekilsiz / Monolitik

Conventional dense casting refractories across the alumina range, for general high-temperature linings and pre-cast shapes.

Tipik

50–85% Al₂O₃ · service to 1750°C

Kaliteler

KONCAST 50 / 60 / 70 / 80 / 85

Kullanım

Kiln hoods, transfer chutes, pre-cast blocks, general linings.

Low-cement and SiC-bearing vibration castables delivering high density, strength and resistance to abrasion and alkali attack.

Tipik

30–90% Al₂O₃ · up to 60% SiC

Kaliteler

KONLOWCAST 55A–97H · KONLOWCAST 30–80 SİC (silicon carbide)

Kullanım

Cement calciner and inlet chamber, burner blocks, high-abrasion zones.

Alumina-based castables (casting and vibrating grades, including steel-fibre and SiC variants) for demanding precast and field applications.

Tipik

40–95% Al₂O₃ · service to 1875°C

Kaliteler

KONHAL 40C–95C · KONHAL 45–95 LCC · KONHAL SİC LCC · KONHAL 95 LCC Cr

Kullanım

Pre-cast purging-plug and tap-hole blocks, EAF delta roofs, ladle safety lining.

Gunning mixes for fast application and maintenance repair, including SiC-bearing grades for added wear resistance.

Tipik

30–80% Al₂O₃

Kaliteler

KONGUN 30 / 45 / 55 / 60 / 80 · KONGUN 55 SİC 5

Kullanım

Maintenance gunning of kilns, ducts and preheaters; rapid lining repair.

Lightweight insulating castables for back-up and hot-face insulation, reducing shell temperatures and heat loss.

Tipik

bulk density 0.8–1.3 g/cm³

Kaliteler

KONISOCAST 25/0,8 · 30/1,0 · 30/1,2 · 35/1,3

Kullanım

Back-up insulation behind working linings, low-duty insulating layers.

Dry vibration / ramming mixes from high-purity sintered magnesia and chromite for furnace bottoms and knuckle areas.

Tipik

61–96% MgO

Kaliteler

YD 026 / 026E / 120 / 320 · ND 015 / 016 / 413 · NC 211 · KONRAM 93 / 93 ST · NB 011–112 (back ramming)

Kullanım

EAF and converter bottoms, knuckle ramming, back-fill ramming.

Complete induction-furnace lining range: basic and neutral magnesia / magnesia-spinel, fused & seawater magnesia, and acidic silica ramming masses.

Tipik

basic, neutral/spinel and acidic linings

Kaliteler

YD/YC 015–085 SP/SPS/SPK (spinel) · FD 020 / 120 / 413, FC 211 (fused) · REFKON-1/2/3/4 (acidic silica)

Kullanım

Coreless induction furnace working linings — iron and steel foundries.

Hot-repair gunning mixes and tundish working-lining coating and patching materials for fast turnaround.

Tipik

82–95% MgO

Kaliteler

ST3 PSY / ST2 PS / ST3 PS / ST3 PSC / ST3 SD · KON TP (coating) · KON TS (patching)

Kullanım

Hot gunning repair of basic linings; tundish wear-lining spray coating and patching.

Jointing mortars matched to the brick range — basic (magnesite) and alumina-silicate grades, in ceramic and chemical bonds.

Tipik

basic and alumina-silicate

Kaliteler

NA 010, YA 020 / 020H / 120H / 020HD (basic) · KON HAL 36M–90M (alumina)

Kullanım

Jointing and bedding mortar for magnesia, magnesia-chrome and alumina brickwork.